Military and Defense2026-10-20T10:50:35-04:00

Military & Defense Metal
Finishing Services

National Aerospace Processing (NAP) provides mission-critical metal finishing for military and defense components, delivering Mil-Spec treatments with controlled quality, full traceability, reliable turnaround, and support for applicable ITAR requirements.

Defense-Ready Quality and Compliance Standards

Defense programs demand controlled processing, repeatable quality, and strict documentation. NAP supports military work through certified systems, including Nadcap AC7004 and AS9100, meeting all contract and government requirements.

Nadcap AC7004 and AS9100 Quality Systems

NAP’s quality systems provide full process traceability from incoming material through final inspection and shipping documentation.

Nadcap Chemical Processing Accreditation

NAP holds Nadcap accreditation for Paint (AC7108/1), Anodize (AC7108/8), Passivation (AC7108/12), ChemFilm (AC7108/11), and Shot Peen (AC7117/2), helping ensure consistent quality and specification compliance.

Customer-Specified Defense Program Controls

NAP processes defense work to customer-specified requirements, including applicable ITAR controls and CUI handling, access, documentation, and processing procedures.

Mil-Spec Finishing for Mission-Critical Parts

NAP provides defense contract painting and surface treatment services for components exposed to corrosion, chemicals, friction, wear, and demanding field conditions. Processes are completed to applicable military, aerospace, OEM, and customer specifications.

CARC and Mil-Spec Painting Services

NAP applies CARC systems, Mil-Spec-compliant coatings, heavy-duty military primers, and durable topcoats designed to protect defense components against corrosion, chemicals, and harsh operating environments.

Teflon and Dry Film Coating Services

Teflon, PTFE, and dry film coatings reduce friction and wear while supporting reliable component performance in demanding military and aerospace applications.

Surface Preparation and Metal Finishing

Anodizing, ChemFilm, passivation, shot peening, airblast, and wheelblast prepare and protect components while improving coating adhesion, durability, and corrosion resistance.

Built to Support Defense Mission Readiness

NAP helps military suppliers and defense contractors keep critical programs moving through responsive service, scalable capacity, and controlled finishing processes. Integrated capabilities reduce supplier handoffs while supporting quality from preparation through final coating.

Keep Your Defense Program Moving Forward

Partner with National Aerospace Processing for certified Mil-Spec finishing tailored to your defense program’s quality, volume, and turnaround requirements.

Military & Defense
Metal Finishing
FAQs

Where can I get Nadcap AC7004-certified CARC painting and surface prep for military parts?2026-10-12T11:37:18-04:00

National Aerospace Processing (NAP) supplies Nadcap AC7004-accredited surface preparation and CARC painting for military and defense applications from our facility in Stow, Ohio. AC7004 certifies the quality system governing every process a shop performs, so the surface prep feeding into CARC painting is held to the same documented, auditable standard as the paint application itself — which is the paper trail defense program quality teams look for before closing out a purchase order.

That AC7004 framework covers:

  • Surface preparation: Controlled cleaning, degreasing, and substrate prep required before any coating is applied.
  • CARC application: Chemical Agent Resistant Coating applied in controlled spray environments on a dedicated conveyor paint line, meeting MIL-DTL-53072.
  • Process documentation and traceability: Work instructions, control plans, and full lot tracking from receiving through certification.
  • Nadcap Chemical Processing accreditation for Paint (AC7108/1): The merit accreditation covering primer and topcoat application, including CARC systems, underneath the AC7004 quality system.

Holding both AC7004 and AC7108/1 accreditation means a CARC job is backed by proof that the process and the system managing it are both independently audited to aerospace standards. National Aerospace Processing has maintained this accreditation stack while serving defense contractors since 1979. Review current certificate scope on our certifications page.

What is CARC coating, and how is it applied to meet military finishing specifications?2026-10-12T11:38:01-04:00

CARC (Chemical Agent Resistant Coating) is a specialized polyurethane paint system the Department of Defense requires on tactical equipment, and National Aerospace Processing (NAP) applies CARC systems that meet MIL-DTL-53072 under its Nadcap AC7004 quality system and AC7108/1 paint accreditation. Standard paints absorb chemical warfare agents and decontamination fluids into their film, making a contaminated part nearly impossible to fully clean; CARC’s chemical structure resists that absorption, which is why the Army mandated it on tactical vehicles and aircraft in the mid-1980s, with the Marine Corps and Air Force following soon after.

Applying CARC to meet spec isn’t a single step, but rather the final stage of a controlled sequence. Parts are cleaned and degreased, often conversion coated or otherwise surface-treated to improve corrosion resistance and paint adhesion, primed, and then CARC topcoated in a controlled spray environment before curing. Skipping proper surface prep undermines the whole system, since CARC applied over an improperly prepared substrate won’t adhere or perform to spec no matter how correctly the paint itself is mixed and applied.

Beyond chemical resistance, CARC’s matte, low-gloss finish supports camouflage and infrared signature management, and it holds up to fuels, oils, and field abrasion far better than standard coatings. National Aerospace Processing runs this entire process — from surface prep through CARC topcoat — on its Nadcap-accredited conveyor paint line, so a part doesn’t lose traceability moving between steps.

What’s the difference between conversion coating and CARC painting on aerospace and defense parts?2026-10-12T11:38:26-04:00

Conversion coating and CARC painting solve two different problems on the same part, and National Aerospace Processing (NAP) applies both because most military components need one before the other. Conversion coating, also called ChemFilm, is a thin chemical treatment applied to bare aluminum that converts the surface into a corrosion-resistant layer and gives paint something to grip onto. CARC is a topcoat paint system applied over that prepared, primed surface to add chemical agent resistance, camouflage, and environmental protection.

  • Conversion coating (ChemFilm): Meets MIL-DTL-5541 Type I or II and AMS-2473; provides corrosion resistance, conductivity, and paint adhesion
  • CARC painting: Meets MIL-DTL-53072; provides chemical agent resistance, camouflage, and IR signature management
  • Sequencing: parts are cleaned, conversion coated, primed, and then CARC topcoated, with inspection between each step
  • Why both matter: CARC over untreated aluminum adheres poorly and corrodes underneath, while conversion coating alone offers no chemical agent resistance

Because these steps build on each other, National Aerospace Processing performs conversion coating and CARC painting within the same Nadcap AC7004-accredited process flow, so a part moves from bare metal to a CARC-finished, mission-ready component without leaving NAP’s Stow, Ohio facility. Details are on our ChemFilm coating services page and wet painting services page.

What does a complete multi-step finishing process look like for a defense part that needs CARC, conversion coating, and other treatments?2026-10-12T11:38:55-04:00

National Aerospace Processing (NAP) runs multi-step finishing as one continuous process under its Nadcap AC7004 quality system, rather than passing a defense part between disconnected vendors between each coating. A part needing passivation, conversion coating, and CARC paint moves through each stage in sequence, with inspection and documentation checkpoints before it advances.

Here’s what that sequence typically looks like on a part:

  • Surface preparation: Cleaning and degreasing to remove oils, contaminants, and scale before any chemical process begins.
  • Passivation or anodizing: Strengthening corrosion resistance per AMS-2700, ASTM A967, MIL-PRF-8625, or AMS2471, depending on the base metal.
  • Conversion coating: ChemFilm treatment per MIL-DTL-5541 or AMS-2473 to improve paint adhesion and add corrosion protection.
  • CARC or wet painting: Primer and CARC topcoat per MIL-DTL-53072, or standard MIL-Spec and AMS painting, applied on a conveyor line or in controlled booths.
  • Curing, inspection, and certification: Infrared curing followed by coating-thickness checks and documentation before shipment.

Every stage runs under the same AC7004 quality system, plus the specific Nadcap Chemical Processing accreditations covering paint, anodize, passivation, and ChemFilm, so a part keeps full traceability no matter how many processes it passes through.

National Aerospace Processing has coordinated this kind of multi-step finishing for defense programs since 1979. See the full breakdown on our metal finishing services page.

What certifications should a defense metal finisher have?2026-09-16T08:33:46-04:00

A defense metal finisher should hold Nadcap accreditation for its aerospace quality system (AC7004) and for the specific processes it performs, along with an AS9100-aligned quality system, full lot traceability, and defined ITAR and CUI handling procedures where the contract requires them.

National Aerospace Processing (NAP) meets these standards with Nadcap AC7004, AS9100 quality systems, and Nadcap chemical processing accreditations covering Paint (AC7108/1), Anodize (AC7108/8), Passivation (AC7108/12), Chem Film (AC7108/11), and Shot Peen (AC7117/2) — plus customer-defined ITAR and CUI controls for programs that require them — together supporting durable, specification-compliant finishes with documented traceability.

What quality systems support Mil-Spec finishing for military components?2026-09-16T08:33:46-04:00

Mil-Spec finishing for military and defense components should be backed by controlled, certified quality systems with full documentation. NAP’s Nadcap AC7004 and AS9100 quality systems deliver durable, specification-compliant finishes with full lot traceability for aerospace manufacturers, military suppliers, and defense contractors.

Where can I get CARC painting and Teflon coating for military parts?2026-09-16T08:33:46-04:00

CARC painting and Teflon coating for military parts are available from NAP at our facility in Stow, Ohio. NAP applies CARC systems, heavy-duty military primers, and topcoats, along with Teflon, PTFE, and dry film coatings — each completed to applicable customer, military, aerospace, and OEM specifications.

What surface preparation supports Nadcap AC7004-compliant defense parts?2026-09-16T08:33:46-04:00

Nadcap AC7004-compliant surface preparation and metal finishing for defense and aerospace components should cover both prep and final coating under one controlled process. NAP handles this at our Northeast Ohio facility, completed to applicable military, aerospace, OEM, and customer specifications. Capabilities include:

  • Surface prep: anodizing, chem film, passivation, and shot peening
  • Mil-Spec-compliant coatings and topcoats
  • Heavy-duty military primers
  • Teflon, PTFE, and dry film coatings
How do you address ITAR and CUI requirements for defense programs?2026-09-16T08:33:46-04:00

At NAP, we process defense work in accordance with the ITAR and CUI requirements specified by each customer and program, covering handling, access, documentation, and processing controls. Because ITAR applicability and CUI handling are defined by the contracting customer, NAP works with each customer to identify the applicable requirements before processing begins. Program-specific ITAR and CUI details are confirmed directly with NAP during supplier qualification.

Go to Top